Lead Work in Gloucester,Watertight Where It Matters Most
Seal the joints where most roof leaks begin. Free survey, fixed-price quote within a day of the visit and work carried out by an experienced roofing family.
See Our Work in Action
Roof tile and lead flashing detail
Lead Work:What You Need to Know
What it is
Lead work covers the flashings, valleys and weatherings that seal the joints on a roof, where it meets a wall, a chimney, a dormer or another roof slope. Lead is shaped by hand to fit each junction, creating a durable, watertight detail that tiles alone can't achieve.
Who it's for
This service is for homeowners with leaks around chimneys, walls, dormers or valleys, for anyone whose existing lead has cracked, lifted or gone missing, and for re-roofing or extension projects where new lead details are needed.
When you need it
You may need lead work if you see damp on chimney breasts or walls below a roof junction, staining around dormers, lifted or split lead visible from the ground, or cracked mortar where lead is tucked into brickwork.
Why it matters who does it
Lead is only as good as the person who fits it. It has to be dressed to the shape of the roof, fixed correctly and allowed to move with temperature changes. One customer's review describes the team replacing tiles and lead work as 'a nice clean job'.
What HappensIf It's Left
Failed lead lets water into the most vulnerable parts of a roof, often straight onto timbers and walls.
Damp walls and chimney breasts
Water running behind a failed flashing soaks into brickwork and shows up as damp patches inside.
Timber decay
Leaks at valleys and abutments run onto rafters and battens, causing rot that spreads unseen.
Interior damage
Ceilings and decorations near chimneys and dormers are often the first to suffer.
Bigger repairs later
A flashing repair today can prevent a much larger roof or chimney repair next year.
Common mistakes to avoid
- Covering lifted lead with sealant or tape instead of refixing it properly.
- Using lead that's too small or too thin for the job.
- Ignoring cracked mortar where the lead is tucked into the wall.
- Leaving a stolen or missing flashing until the next heavy rain.
Five Clear Steps,No Surprises
- 1
Free survey
We inspect flashings, valleys and junctions and trace where water is getting in.
- 2
Clear explanation
We show you what has failed and why, and what's needed to fix it.
- 3
Fixed-price quote
A fixed price, usually within a day of the visit.
- 4
Lead work
Lead is cut, dressed and fixed to suit each junction on your roof.
- 5
Tidy finish and guarantee
The area is cleaned up and guarantee details confirmed.
Guarantee details for your lead work are confirmed in writing with your quote.
What You GetWhen You Choose Us
Longevity
Properly fitted lead protects roof junctions for the long term.
Leak prevention
We seal the joints where many roof leaks start.
Cost certainty
One fixed price agreed before we begin.
Speed
Quotes within a day of the visit.
Experience
Three generations of roofing and over 100 years of combined team experience.
Peace of mind
Fully insured and Checkatrade-listed.
Roofing has run through Michael Wilshire's family for generations: his grandfather started in the trade, his uncles and father followed, and Michael has added 15 years of his own. Today the six-person team brings over 100 years of combined experience to every job across Gloucester and the surrounding region.
How We PriceLead Work
Every lead work job starts with a free survey. We come to the property, look at the problem properly and talk you through what we've found. You don't pay anything for the visit and there's no obligation to go ahead.
After the visit we send you a fixed-price quote, usually within a day. We don't work on an hourly rate, so the figure on the quote is the figure you pay; the job taking a little longer than expected doesn't change your bill. Deposits are only required on larger jobs, and no deposit is needed for repairs.
Because every property is different, we don't publish set prices online. A fixed price based on your actual roof is fairer and more accurate than a guess based on averages.
Working WithRedland Roofing
- Hours: Monday to Saturday, 7am to 7pm. Closed on Sundays.
- Emergencies: emergency repairs are available up to around 7pm, Monday to Saturday.
- Guarantees: 25 years on new pitched roofs and 15 years on new flat roofs. Repair guarantees are assessed and confirmed on site.
- Credentials: fully insured, listed on Checkatrade, with a 5.0 Google rating from 16 reviews.
- Tidy sites: customers regularly mention waste taken away and areas swept and cleaned up once the work is done.
- Who you'll deal with: a family-run, six-person team led by founder Michael Wilshire.
What LocalCustomers Say
“Honest, reliable, quick and tidy. Definitely adding them to my list of trusted trades.”
“Called back within 5 minutes, arrived the same day, agreed a price and completed the work within a few hours. No hassle.”
“Excellent service, great communication and completed the work to a professional standard. Would highly recommend.”
Six Questions to AskAny Roofer
Whoever you choose for your lead work, these questions will help you compare quotes fairly and avoid unpleasant surprises.
- 1
Is the price fixed?
An hourly rate or a vague estimate can grow as the job goes on. Ask for a fixed total in writing before any work begins. Every Redland quote is a fixed price.
- 2
What exactly is included?
Two quotes can look very different once you compare what's actually being done. Ask for the work to be described clearly so you're comparing like with like.
- 3
What's the guarantee, and is it in writing?
A guarantee period should be stated, not implied. Ours are 25 years on new pitched roofs and 15 years on flat roofs, with repair guarantees confirmed on site.
- 4
Are you insured?
Roofing is work at height. Make sure whoever you hire is insured. We are fully insured.
- 5
Can I read independent reviews?
Reviews on independent platforms are harder to fake than testimonials on a website. You can read ours on Google and Checkatrade.
- 6
How soon will I get the quote?
A slow quote is often a sign of slow work. We aim to send your quote within a day of the visit.
Lead WorkExplained
Lead is used in several places on a typical roof. These are the main types of lead work we carry out.
Abutment flashings
Where a roof slope meets a wall, step or cover flashings direct water away from the junction. We fit and refix them so water runs onto the tiles rather than into the wall.
Chimney flashings
Chimneys need flashings on every side. Failed chimney lead is a very common cause of leaks; see our chimney services page for repointing and flashing work.
Valleys
Lead-lined valleys carry large volumes of water between two roof slopes. Split or worn lead valleys are re-lined to restore a watertight channel.
Dormers and bays
Dormer cheeks, tops and bay roofs often use lead to seal awkward shapes. We dress lead to fit so there are no gaps for water to find.
Lead as part of a repair or re-roof
Lead work is often carried out alongside tile repairs or as part of a new roof, so every junction is renewed at the same time.
Why lead lasts
Lead is soft enough to be shaped around complicated junctions by hand, yet durable enough to sit exposed to the weather for many years. That combination is why it remains the traditional choice for flashings, valleys and weatherings on pitched roofs.
Allowing for movement
Lead expands and contracts with temperature. Fitting it in sensibly sized pieces, with proper laps and fixings, lets it move without splitting. Lead that has been fitted in pieces that are too long, or fixed too rigidly, is one of the most common reasons we see cracked flashings.
Where lead meets mortar
Flashings are usually tucked into the mortar joints of a wall or chimney. If that mortar cracks, water gets behind the lead. We check and re-secure these joints as part of the job, because a perfect piece of lead is no use if the wall above it lets water in.
Related services
Areas we cover
Lead Work service areas across Gloucester, Cheltenham, Worcester, Swindon, Malvern, Stroud, Chepstow, Forest of Dean, Tewkesbury and Evesham , plus surrounding villages.
Lead WorkQuestions Answered
How much does lead work cost?+
It depends on the amount of lead and the junctions involved. We give you a fixed price after a free survey.
How quickly will I get a quote?+
Usually within a day of the visit.
Do I need a deposit?+
Deposits are only required on larger jobs and are not needed for repairs.
Is lead work guaranteed?+
Guarantee details are confirmed in writing with your quote. Repair guarantees are assessed on site.
Can you fix a leak around my chimney?+
Yes. Chimney flashings are one of the most common causes of leaks, and we repair and replace them.
Do you offer emergency repairs?+
Yes, Monday to Saturday up to around 7pm.
Can lead work be done at the same time as other roof repairs?+
Yes, and it often makes sense to do so while access is in place.
Which areas do you cover?+
Gloucester, Cheltenham, Worcester, Swindon, Malvern, Stroud, Chepstow, the Forest of Dean, Tewkesbury, Evesham and surrounding villages.
Know the PriceBefore We Start
Free survey, fixed-price quote within a day of the visit. Rated 5.0 on Google, listed on Checkatrade.